NanoCeram Pleated 4.5" x 10" Filter

NanoCeram® Pleated 4.5" x 10" Filter is an exceptionally unique filter with an absolute rating of 0.2 microns while maintaining high flow rates comparable to 3 micron pleated filters. Using a technological advancement in water filtration that has been used by NASA, U.S. Air Force, Toyota and many others for a performance in filtration that produces incredible results and cost savings for a broad range of particles down to 0.2 microns.

Benefits and Features:

• High Flow rates with Nano filtration
• Turbidity Reduction: < 0.01 NTU until Terminal ΔP (40psi)
• Cyst Retention: > 5 LRV
• Bacteria (Klebsiella terrigena): > 5 LRV
• Temperature Range: 39 - 135° F (4 - 57°C)
• Maximum Pressure: 70 psi (4.83 bar)
• Effective pH Range: 5 - 10
• Efficiency: 99.9% reduction of 0.2μ particulate (monodispersed latex spheres)

The NanoCeram® use (electro-adhesion) adsorption as the filtering mechanism. NanoCeram® is an electropositive fibrous filter media with high particle removal efficiency as well as high dirt holding capacity. This electro-adhesion gives the NanoCeram® the capacity to filter Nano sized contaminants from water which includes viruses and colloidal irons.

Thermally bonded blend of micro-glass fibers & cellulose infused with nano-alumina fibers in a non-woven matrix creates an electro-positively charged depth filter media. When assembled into a pleated cartridge, NanoCeram® offers a unique combination of efficiency, capacity, flow rate & low pressure drop at levels unmatched in today’s filtration marketplace.

Each NanoCeram® pleated filter cartridge is designed to satisfy the most difficult requirements in water treatment. By using the scientific principal of electropositive attraction and adsorption. NanoCeram® technology leads to a rapid and highly efficient adsorption of virtually all particle sizes. NanoCeram®’s media has a high capacity for particles as large as tens of microns or as small as a few nanometers. Each NanoCeram® Filter Cartridge exhibits a rating of 0.2μ a rating typically associated with ultraporous membranes. Yet NanoCeram® flow rates are hundreds of times greater than such membranes.

The NanoCeram® Filters offers to home owners and business a technological advantage that has only been available to a few select groups in the past.