NanoCeram Pleated 2.5" x 10" Filter

2.5 x 10" NanoCeram Pleated Water Filter
Cost:  $74.38

NanoCeram® Pleated 2.5" x 10" Filter is an exceptionally unique filter with an absolute rating of 0.2 microns while maintaining high flow rates comparable to 3 micron pleated filters. Using a technological advancement in water filtration that has been used by NASA, U.S. Air Force, Toyota and many others for a performance in filtration that produces incredible results and cost savings for a broad range of contaminants down to 0.002 microns.

The NanoCeram® use (electro-adhesion) adsorption as the filtering mechanism. NanoCeram® is an electropositive fibrous filter media with high particle removal efficiency as well as high dirt holding capacity. This electro-adhesion gives the NanoCeram® the capacity to filter Nano sized contaminants from water which includes viruses and colloidal irons.


Thermally bonded blend of micro-glass fibers & cellulose infused with nano-alumina fibers in a non-woven matrix creates an electro-positively charged depth filter media. When assembled into a pleated cartridge, NanoCeram® offers a unique combination of efficiency, capacity, flow rate & low pressure drop at levels unmatched in today’s filtration marketplace.


Each NanoCeram® pleated filter cartridge is designed to satisfy the most difficult requirements in water treatment. By using the scientific principal of electropositive attraction and adsorption. NanoCeram® technology leads to a rapid and highly efficient adsorption of virtually all particle sizes. NanoCeram®’s media has a high capacity for particles as large as tens of microns or as small as a few nanometers. Each NanoCeram® Filter Cartridge exhibits a rating of 0.2μ a rating typically associated with ultraporous membranes. Yet NanoCeram® flow rates are hundreds of times greater than such membranes.


The NanoCeram® Filters offers to home owners and business a technological advantage that has only been available to a few select groups in the past.

NanoCeram Pleated.pdf141.3 KB